Expandable Add-A-Gauge Technology
The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka XGauge) technology. Add to the original 12 gauges by customizing the ScanGaugeII to monitor up to 25 more--depending on your specific vehicle's sensor design. Four gauges can be displayed simultaneously and can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data.
 ScanGaugeII mounts easily to your dash.
|
Gauges include:
- Horsepower
- Fuel Consumption Rate to 1/100th per gallon/liter
- Vehicle speed (MPH)
- Fuel Economy
- Cost Per Mile/Cost Per Trip
- Manifold Pressure (not available on some vehicles)
- Battery Voltage
- Engine Load
- Coolant Temperature
- Throttle Position
- Intake Air Temperature
- Ignition Timing
- Engine Speed (RPM)
- O2 Sensor Data
- Fuel Trim
- Hybrid Battery Charge (for Toyota Prius and Ford Escape)
- And many more, depending on your vehicle's sensor design
Scan ToolThe ScanGaugeII includes a diagnostic scan tool that can check for Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the "Check Engine" light on 99% of 1996 and newer vehicles. (However, this feature may not work on some trouble codes in Dodge vehicles.) If any DTCs are found, the ScanGauge will show how many there are as well as the codes themselves. Then you can use the Internet or repair manual to find out which is the failed part is, so you can repair it yourself or know what needs to be fixed at the mechanic's shop.
Multifunction Trip Computer
Four sets of data are automatically recorded on the trip computer: Current, Today, Previous Day, and Tank Trip. The "current" trip restarts after the engine has been off for more than 3 minutes. The "today" trip restarts after the vehicle has not moved for 9 hours, and the data from "today" is moved to "previous day" when you restart the car, so you don't have to reset the computer every time you begin a trip. "Tank trip" resets when you fill up the tank. It can provide you with "to empty" data and other useful information, which can be viewed any time during the trip. The trip computer also integrates information from the Cost Per Mile gauge. Simply enter how much you paid per gallon or liter of fuel, and the ScanGauge will automatically calculate the cost of your trips as you drive. The ScanGaugeII features 12 individually stored parameters, including:
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Fuel Cost
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
Personalize ItA large, high-contrast LCD display makes viewing the information easy, and both the display and keys are backlit and can be set to off, low, or high. With 63 possible colors, user settings, tank trip data, and vehicle settings that are automatically saved, and up to 10 user commands that can be stored and recalled, the ScanGaugeII can be easily customized to suit your needs.
Product DescriptionSee what's going on under the hood As a general rule geeks like to have access to as much data and statistics as possible. We pretty much figure this applies to a geek's motor vehicle as well. So, to allow you to access extra information about your car we would like to introduce the ScanGauge 3-in-1 Auto Computer. This gadget is easy to install and provides a set of digital gauges, a comprehensive trip computer, and an engine trouble code scan tool. The digital gauges mode displays four different properties on the screen (for example, fuel economy, battery voltage, coolant temperature, and engine speed). The trip computer tracks your vehicle's maximum speed, average speed, driving time, driving distance, trip fuel economy and several other pieces of trip data. The engine trouble code scan tool lets you read standard engine trouble codes as well as clear the "check engine" light and other warning lamps. The ScanGauge is simple to use and install and mounts in, on or below the dash. It plugs into the diagnostic OBD-II connector found under the dash on 1996 and newer cars and light trucks. The functions are accessed via a simple on-screen menu interface. There is an automatic delayed power-down after engine shutoff and automatic power-up when engine is started. User and vehicle settings are automatically saved.
